Mold Creations
11-6-18
The week of Nov. 6th we worked on machining out the molds for the different components.
We had finished most of the CAMs at this point and needed to get Joe's eyes on them for confirmation that the CAM would work.
We were able to have not only the injection mold of the plate done, but also a draft of the thermoformed part 3D printed.
An example of our machining process is demonstrated below:
The week of Nov. 6th we worked on machining out the molds for the different components.
We had finished most of the CAMs at this point and needed to get Joe's eyes on them for confirmation that the CAM would work.
We were able to have not only the injection mold of the plate done, but also a draft of the thermoformed part 3D printed.
An example of our machining process is demonstrated below:
We were able to create the mold for our most complex part, the donut top.
Below is an image showing this mold.
Comments
Post a Comment